首页 > 产品信息 > 电源 > 数字电源 > PD2系列 > PD2-3024(A)

PD2-3024(A)

  • 标准品

This Digital Control Unit can be used for LED Light Units with an input voltage of 24 V within a total power consumption of 28 W. It operates on a 100 to 240 VAC input and measures 62 x 170 x 110 mm (width x depth x height).

产品详细信息

外观尺寸 W 62mm x D 170mm x H 110mm
适合光源(输出定额) 24 V/28 W
通道数 1 channel
发光方式 常时发光
驱动方式 Constant lighting
调光方式 PWM control
调光 Use of the intensity control knobs on the front panel (Coarse and Fine, 16 steps for each knob)
PWN频率 62.5 kHz
输入电压 100 to 240 VAC
频率 50/60 Hz
消耗功率 78 VA typ.
输出电压 24VDC
输出电流 1.1 A
涌入电流(typ) 15 A (at 100 VAC) *From a cold start
错误检测显示 The Error indicator lamp on the front panel is lit when overcurrent is detected
错误检测输出 External control connector pin 14(OCP): Open in normal condition, Open-collector ON when an overcurrent is detected
过电流保护 Yes
外部控制输入 Insulation: Not insulated with a Control Unit
Circuit: Pull-up of +5 V internally by use of resistor (4.7 kΩ), HS-CMOS input
输出端口 SMP-03V-BC (1: Output(+), 2: NC, 3: Output(-)) x 2
SMP-04V-BC (1: Output(+), 2: NC, 3: Output(-), 4: Fan(GND))
外部控制端口 Manual ON/OFF control: Phone jack (Φ3.5)
External control: 15-pin D-sub plug with M2.6 mm screws
适合规格 CE, UKCA、RoHS
使用温湿度 Temperature: 0 to 40°C, Humidity: 20 to 85%RH (no condensation)
保存温湿度 Temperature: -20 to 60°C, Humidity: 20 to 85%RH (no condensation)
冷却方式 Natural air cooling
重量 1,100 g max.
材质 Steel plate t1.0
附属品 2m long 3-prong AC power cord with ground terminal, Instruction Guide, Optional Cable Operation Guide

外形尺寸图(mm)

* Click to enlarge image.

线缆

  • NFCB2-3

  • EXCB2-B3

资料下载

综合目录(摘录) PDF图纸 DXF图纸 使用说明书 关于保证和环境管制 Optional Cable List 3D-CAD

产品类别