首页 > 产品信息 > 电源 > 数字电源 > PD2系列 > PD2-3012-8(A)

PD2-3012-8(A)

  • 标准品

This 8-channel Digital Control Unit can be used for LED Light Units with an input voltage of 12 V within a total power consumption of 25 W. It operates on a 100 to 240 VAC input and measures 110 x 170 x 122 mm (width x depth x height).

产品详细信息

外观尺寸 W 110 mm x D 170 mm x H 122 mm
适合光源(输出定额) 12 V/25 W
通道数 8 channels
发光方式 常时发光
驱动方式 Constant lighting
调光方式 PWM control
调光 Use of the intensity control knobs on the front panel (Coarse and Fine, 16 steps for each knob)
PWN频率 62.5 kHz
输入电压 100 to 240 VAC
频率 50/60 Hz
消耗功率 78 VA typ.
输出电压 12 VDC
输出电流 2.1 A (total for 8 channels)
涌入电流(typ) 15 A (at 100 VAC) *From a cold start
错误检测显示 The Error indicator lamp on the front panel is lit when overcurrent is detected
错误检测输出 External control connector 12 pin (OCP): Open in normal condition, Open-collector ON when an overcurrent is detected.
过电流保护 Yes
外部控制输入 Insulation: Not insulated with a Control Unit
Circuit: Pull-up of +5 V internally by use of resistor (2.2 kΩ), HS-CMOS input
输出端口 SMP-02V-BC (1: Output(+), 2: Output (-)) x 8
外部控制端口 External control: 25-pin D-sub plug with M2.6 mm screws
适合规格 CE, UKCA、RoHS
使用温湿度 Temperature: 0 to 40°C, Humidity: 20 to 85%RH (no condensation)
保存温湿度 Temperature: -20 to 60°C, Humidity: 20 to 85%RH (no condensation)
冷却方式 Natural air cooling
重量 1,500 g
材质 Steel plate t1.0
附属品 2m long 3-prong AC power cord with ground terminal, Instruction Guide, Optional Cable Operation Guide
注意事项 The light connector is 2-pin.

外形尺寸图(mm)

* Click to enlarge image.

线缆

  • EXCB2-25-3

资料下载

综合目录(摘录) PDF图纸 DXF图纸 使用说明书 关于保证和环境管制 Optional Cable List 3D-CAD

产品类别